Abstract
The performance of a ‘low-stress wheel’ exposed to vertical and lateral contact forces and to thermal braking loads is investigated. Based on finite element calculations, a two-level fractional factorial design method is used to quantify the influences of rim thickness, disc thickness and hub-rim offset on thermal and mechanical stressses, on axial rim displacement, and on wheel mass. A number of approximating linear empirical formulas have been obtained. They offer a powerful tool in designing and optimizing railway wheels. The most effective measure to reduce thermal and mechanical stresses is found to be a hub-rim offset but the penalty is a thermoelastic axial rim displacement during heating. This displacement can be minimized by using as large an offset as possible within geometrical limits. In contrast to the standard type of wheel, no residual deformations and large stresses are induced in the offset wheel after heavy block braking. Full-scale dynamometer brake tests performed on a new prototype wheel are reported. The test results support the calculation model used.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.