Abstract
This work studies the efficiency of an electroflotation process for the separation of the solids produced during the electrocoagulation treatment of three different types of wastewater: kaolin suspension, coloured organic solution and oil-in-water emulsion. Additionally, a combined electrocoagulation-electroflotation reactor is designed and optimized taking into account the effect of current density, residence time, pollutant concentration and the ratio floated/settled solids. To do this, an experimental design with response surface methodology (RSM) has been used. Results show that electroflotation is a good alternative to the removal of oil microdrops and dyes, but it is not recommended for the separation of solids formed during electrocoagulation of colloid suspensions due to its high density. It has been found that the use of aluminium leads to better results than the use of iron in the treatment of oil-in-water emulsions and coloured solutions. In these cases, the use of a combined electrocoagulation-electroflotation reactor is recommended and the effect of the main inputs has been studied.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.