Optimization Design of Mix Proportion for Fly Ash-Silica Fume-Basalt Fiber-Polypropylene Fiber Concrete under Steam Curing Condition.

Abstract

To enhance the physical and mechanical characteristics of steam-cured concrete, an orthogonal experimental design was utilized to examine the effects of varying contents of fly ash (0 wt%, 10 wt%, 15 wt%, 20 wt%), silica fume (0 wt%, 5 wt%, 10 wt%, 15 wt%), basalt fiber (0 vol%, 0.05 vol%, 0.1 vol%, 0.2 vol%), and polypropylene fiber (0 vol%, 0.05 vol%, 0.1 vol%, 0.2 vol%) on its mechanical properties. Utilizing range and variance analyses, this study identified four preliminary optimized compositions of concrete incorporating fly ash, silica fume, basalt fiber, and polypropylene fiber. On this basis, in order to determine the optimal mix proportion, the mechanical performances, the pore characteristics, and the microstructure of four optimized mix proportions were analyzed. According to the results of macroscopic, fine, and microscopic multi-scale tests, the addition of 15 wt% fly ash, 10 wt% silica ash, 0.2 vol% basalt fiber, and 0.1 vol% polypropylene fiber to the steamed concrete is the best to improve the performance of the steamed concrete. Compared to ordinary concrete, the compressive strength increases by 28%, the tensile strength increases by 40%, and the porosity decreases by 47.2%.