Abstract
With high-effective screen-printing technique, the diode field emission display (FED) panel with carbon nanotube (CNT) as cathode material was fabricated. For improving the field emission properties, the annular field emitter was developed. The bar cathode indium tin oxide (ITO) electrode was formed by the divided ITO film with the photolithography process. After the sintering process, the printed silver slurry was solidified to form the rectangular ring electrode. The prepared CNT paste was printed to form the cold cathode emitter. Field emission characteristics of sealed FED panel were measured, and the emission image was also presented. A series of low-cost manufacture process was employed in the device fabrication course. The fabricated FED panel exhibited better field emission performance and large emission current.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
