Abstract
As a viable wastewater treatment and energy recovery technology, microbial fuel cell (MFC) requires more research with regard to the simultaneous achievement of high-quality effluent and high power generation. In this study, a novel flow-through carbon-based composite anode configuration is proposed, which combines the carbon cloth of two-dimensional anode with wooden granular activated carbon of three-dimensional anode. The proposed configuration enhances the performance of power production and chemical oxygen demand degradation by promoting the mass transfer, reducing internal resistance and increasing bioburden. Microbial fuel cell with the composite anode exhibited the highest maximum power density (1300 ± 50 mW m−2) and the highest chemical oxygen demand removal rate constant (0.155 ± 0.007 h−1) compared with the microbial fuel cell using the carbon cloth anode (1136 ± 46 mW m−2 and 0.072 ± 0.008 h−1) or the wooden granular activated carbon anode (1045 ± 32 mW m−2 and 0.129 ± 0.009 h−1). Meanwhile, at a lower chemical oxygen demand concentration (about 48 mg L−1), the microbial fuel cell with the composite anode maintained a current density of 2.4 A m−2, which is 18% higher than the wooden granular activated carbon anode (2.04 A m−2) and 400% higher than the carbon cloth anode (0.48 A m−2). The cyclic voltammetry and electrochemical impedance spectroscopy tests confirmed that the composite anodes displayed better electrochemical performance. Improving the flow rate and reducing the external resistance could effectively enhance the power production and chemical oxygen demand removal performance of microbial fuel cells, while the computational fluid dynamics simulation intuitively demonstrated the positive effect of the composite anode on chemical oxygen demand degradation. These results suggest that the flow-through composite anode provides a feasible strategy to simultaneously enhance the power generation and improve the effluent quality.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.