Optimization and modeling of lactose hydrolysis in a packed bed system using immobilized β-galactosidase from Aspergillus oryzae

Abstract

Abstract This work studied the hydrolysis of lactose using β-galactosidase from Aspergillus oryzae immobilized with a combination of adsorption and glutaraldehyde cross-linking onto the ion exchange resin Duolite A568 as a carrier. A central composite design (CCD) was used to study the effects of lactose concentration and feed flow rate on the average hydrolysis reaction rate and lactose conversion in a fixed bed reactor operating continuously with an upflow at a temperature of 35 ± 1 °C. The optimal conditions for the average hydrolysis reaction rate and the lactose conversion included a lactose concentration of 50 g/L and a feed flow rate of 6 mL/min. The average reaction rate and conversion reached 2074 U and 65%, respectively. The immobilized enzyme activity was maintained during the 30 days of operation in a fixed bed reactor with a 0.3 mL/min feed flow rate of a 50 g/L lactose solution at room temperature. Feed flows ranging from 0.6 to 12 mL/min were used to determine the distribution of residence times and the kinetics of the fixed bed reactor. A non-ideal flow pattern with the formation of a bypass flow in the fixed bed reactor was identified. The conditions used for the kinetics study included a lactose solution concentration of 50 g/L at pH 4.5 and a temperature of 35 ± 1 °C. Kinetic models using a PFR and axial dispersion methods were used to describe the lactose hydrolysis in the fixed bed reactor, thus accounting for the competitive inhibition by galactose. To increase the lactose conversion, experiments were performed for two fixed bed reactors in series, operating in continuous duty with upflow, with the optimal conditions determined using the CCD for a fixed bed reactor. The total conversion for the two reactors in series was 82%.