Abstract
In this study, the boric acid extraction from colemanite ore in aqueous media saturated by CO 2 and SO 2 gases was studied and the effects of relevant parameters, namely; reaction temperature, solid-to-liquid ratio, mean particle size, stirring speed and reaction time have been investigated on the boric acid extraction from colemanite ore by using the fractional factorial design and central composite design methods. The chosen experimental parameter levels were as follows: reaction temperature, 11.4–58.6 °C; solid-to-liquid ratio, 0.0685–0.1315 g/mL; mean particle size, 0.2835–3 mm; stirring speed, 107–893 rpm; reaction time, 7.125–22.875 min. A model has been developed between the boric acid extraction efficiency from colemanite ore and relevant parameters by means of variance analysis by using the matlab computer software and the obtained model was used to determine optimum conditions. The optimum conditions were found to be as follows: reaction temperature, 41 °C; solid-to-liquid ratio, 0.0685 g/mL; mean particle size, 0.2835 mm; stirring speed, 266 rpm; reaction time, 7 min. The calculated boric acid extraction efficiency from colemanite ore was approximately 99.9% under the optimum conditions.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
