Abstract
This article statistically investigates the effect of various parameters such as material factors: silicon carbide (SiC) fraction, graphite (Gr) fraction and mechanical factors: normal load, sliding distance and speed on the sliding wear rate of self-lubricating AZ91D-SiC-Gr hybrid magnesium composites. The self-lubricating hybrid composites were fabricated using advanced vacuum assisted stir casting process. The sliding wear tests have been performed under dry conditions on pin-on-disc tribometer at 10-50 N loads, 1-3 m/s sliding speed and 1000-2000 m sliding distance. It has been examined that hybrid composites yielded improved wear resistance with reinforcement of SiC and solid lubricant graphite. ANOVA and signal-to-noise ratio investigation indicated that applied load was the most critical factor influencing the wear rate of fabricated hybrid composites followed by sliding distance. Further, the AZ91D/5SiC/5Gr hybrid composite has exhibited the best wear properties. From the SEM and EDS analysis of worn surfaces, delamination was confirmed as the dominant wear mechanism for AZ91D-SiC-Gr hybrid composites.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
