“Optimization and Characterization of Ni-B Coating of Using RSM Method”

Abstract

Abstract: It is unique properties, the electroless method is used as an effective and important technique to create uniform coatings. Among the coatings that can be made by electroless process is Ni-B coating due to its excellent properties such as good corrosion resistance, high wear resistance, high hardness, favorable oxidation resistance. In this article, after introducing nickel-boron electroless coatings and examining the microstructure and wear rate, recent developments in strategies to improvement in corrosion resistance, tribological properties, and the use of nickel-boron electroless coatings as electrocatalysts. In this study operating parameters are optimized by using RSM method. operating parameters considered for the Reinforcement, temperature and frequency. This paper summarized, the parametric influence of Reinforcement, temperature and frequency on wear rate of Ni-B with ZrSi coating. Response surface methodology (RSM) is used for modelling and optimization. ANOVA has been carried out to identify importance of the operating parameters on the performance characteristics considered. Further the verification experiment has been carried out to confirm the performance of optimum parameters. The results from this study will be useful for selecting appropriate set of process parameters to Ni-B coating has been selected. The analysis of variance (ANOVA) has been used to determine effect of each parameter on wear rate so Finally, the confirmation test has been carried out to compare the predicted value of wear rate with the experimental value.