Optimisation of mechanical behaviour of Calotropis gigantea and Prosopis juliflora natural fibre-based hybrid composites by using Taguchi-Grey relational analysis

Abstract

The properties of organic fibre-based hybrid materials are influenced by a variety of factors and even minor changes in these variables can outcome in substantial discrepancies in strength. In this regard, the current study aims to optimise various influencing parameters such as weight percentage, alkaline treatment concentration, and fabrication parameters (compression moulding pressure, and temperature), with the goal of enhancing the overall strength of the composite. Calotropis gigantea-stem and Prosopis juliflora-bark fibres were used in varying weight percentages to create epoxy-based hybrid composites. After fabrication the mechanical characterisation like tensile, flexural, and impact properties of the composites were tested. Taguchi experimental design was applied, and the results were analysed using a hybrid Taguchi-grey relational investigation method. It was observed that a combination of 20 wt.% Calotropis gigantea/20 wt.% Prosopis juliflora/6 % NaOH pretreatment/100 °C temperature with 14 MPa pressure and had the most desirable mechanical properties in the fabricated composites. Calotropis gigantea ranks first in enhancing the composite strength, followed by Prosopis Juliflora, NaOH pretreatment%, compression moulding temperature and pressure. This work highlights the significant role of Calotropis gigantea and Prosopis Juliflora fibres in enhancing composite strength and provides valuable insights for future research in the field of hybrid composite development.