Optimisation of machining parameters on milling of GFRP composites by desirability function analysis using Taguchi method

Abstract

Milling of GFRP composite materials is a rather complex task owing to its heterogeneity and the number of problems, such as surface delamination, which appear during the machining process, associated with the characteristics of the material and the cutting parameters. Optimization of machining parameters is an important step in machining. This paper presents a new approach for optimizing the machining parameters on milling glass-fibre reinforced plastic (GFRP) composites. Optimization of machining parameters was done by an analysis called desirability function analysis (DFA), which is a useful tool for optimizing multi-response problems. In this work, based on Taguchi’s L27 orthogonal array, milling experiments were conducted for GFRP composite plates using solid carbide end mills with different helix angles. The machining parameters such as, spindle speed, feed rate, helix angle and fibre orientation angle are optimized by multi-response considerations namely surface roughness, delamination factor and machining force. A composite desirability value is obtained for the multi-responses using individual desirability values from the desirability function analysis. Based on composite desirability value, the optimum levels of parameters have been identified, and significant contribution of parameters is determined by analysis of variance.Keywords: GFRP composites; Taguchi; Desirability function analysis; ANOVA; Solid carbide end mill