Abstract
The effects of defatted hemp cake added to corn grits (at ratios of 0, 5, and 10% DM), the moisture content of the mixtures (15, 20, and 25%) and the temperature in the extruder ejection zone (150, 165, and 180°C) on the physical properties of extruded products have been investigated. Statistical optimization of investigated extrusion conditions using the response surface methodology was performed. The hemp cake was completely defatted by means of a supercritical CO2 extraction. The extrusion was performed on a laboratory single screw extruder and regulated by the following parameters: temperature in the dosing and compression zone (120 and 150°C), screw compression ratio (4 : 1), round die (4 mm). The change of extrusion process conditions significantly affected the physical properties of produced snacks. The expansion ratio ranged between 1.38 and 3.11, bulk density between 0.14 and 0.49 g/cm3, hardness between 18.15 and 70.62 N, fracturability from 3.65 to 10.38 mm, and the total colour change between 3.25 and 24.73.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.