Abstract
The increase in energy demand has led to extensive research and development on economically, environmentally and technically feasible ways of improving the ever-growing energy demand. A common derivative of energy is from hydrocarbons, specifically oil. The process of oil recovery can be divided into primary, secondary, and tertiary recovery (also known as enhanced oil recovery). Once the internal pressure of a reservoir has depleted enough during primary and secondary recovery, more advanced techniques in enhanced oil recovery mechanisms are used to recover 50-80% of oil in the reservoir. Tertiary recovery includes the use of surfactants to reduce interfacial tension (IFT) or alter wettability. In this work, a zwitter ionic surfactant at two different concentrations is evaluated for its ability to reduce the interfacial tension between oil and water, as well as altering wettability in silurian dolomite. To achieve this, fluid-fluid analysis was done by a compatibility test, phase behavior test and interfacial tension measurements. Rock-fluid analysis was also completed by means of floatation test, carried out with carbonate rock particles to analyze the surfactant’s ability to alter wettability. Solution pH measurements were taken to validate the qualitative floatation test results. Results show that the surfactant, chembetaine C surfactant, is compatible with all ranges of salinities investigated, though was not able to produce a winsor type III micro-emulsion. The results of the interfacial tension measurements are in line with the phase behavior test, as none of the measurements were at ultra-low values. Surfactant retention is likely to occur with the analyzed zwitterionic surfactant based on the fluid-fluid analysis. Qualitative results from the floatation test show that the wettability of the carbonate rock particles cannot be significantly altered to more water-wet conditions. The pH of the solution remains at alkaline values, which can be beneficial in enhanced oil recovery in producing soap in situ, also known as saponification. Overall, tests conclude that this zwitterionic surfactant at 1% concentration would be most effective at 10,000 ppm salinity brine, though overall is not suitable for chemically enhanced oil recovery.
Highlights
Cite as: Esanullah Y., Barth M., Nwani B., and Trivedi J
Research Question: What is the optimal surfactant slug that is required for an improved oil recovery in Silurian Dolomite rock?
● Based on the fluid- fluid analysis, surfactant retention is likely to occur with the zwitterionic surfactant analyzed
Summary
Cite as: Esanullah Y., Barth M., Nwani B., and Trivedi J. Optimal zwitterionic surfactant slug for an improved oil recovery in oil wet carbonate rocks - silurian dolomite. Optimal Zwitterionic Surfactant Slug for an Improved Oil
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have