Optimal voltage set-point of automatic tap changer transformers and generators and reactive power compensation to increase power system predictability

Abstract

In recent years, renewable energy sources (RESs) such as wind turbines (WTs) have received much attention in both the operating and planning of power systems. These sources have caused many uncertainties in the operation of power systems due to their unpredictable nature. Mentioned uncertainties besides load demands uncertainty, and possible failures in power system components, make the system state unpredictable. The operational decisions are completely challenging in these situations. Any efforts to increase the network operator awareness from the system state will be completely valuable for making accurate decisions.This paper tries to increase the predictability of the power system state through optimal regulating of the voltage setpoint of automatic tap changer transformers and generators besides the reactive power of shunt capacitors. However, conventional objectives such as decreasing losses are considered, simultaneously. This paper uses the K-medoids data clustering method to evaluate the effect of uncertainties. Also, the correlation between input uncertain variables is considered and handled by the Cholesky decomposition technique combined with the Nataf transformation technique. The multi-objective optimization problem is tackled using an improved version of the non-dominated sorting genetic algorithm (NSGA-II). To ensure for validity of the results, studies are repeated using the multi-objective particle swarm optimization (MOPSO) algorithm as another evolutionary-based method.The proposed approach is applied to the IEEE 14 and 30 bus standard system. The results showed that the predictability of the power system can be considerably increased while keeping the losses approximately at its minimum amount.