Abstract
Nanosize H-SOD particles were hydrothermally synthesized as seeds for the secondary growth of hydroxy-sodalite (H-SOD) zeolite membrane. The size and phase purity of H-SOD zeolite particles were carefully controlled by changing several hydrothermal conditions. Especially, NaOH concentration in the hydrothermal solution made a significant effect on the phase purity and particle size. The high phase purity particles with a mean diameter of 80 nm were successfully synthesized at a 3 M NaOH concentration and applied for secondary growth. Overall, uniform H-SOD zeolite membranes with various thicknesses (3, 7, and 9.5 μm) were prepared by varying secondary growth time. The 9.5 μm thick H-SOD zeolite membrane exhibited high H 2 /N 2 permselectivity of 95 at 473 K and a transmembrane pressure of 0.3 MPa. And, the pervaporation performance was evaluated for 90 wt% methanol-water mixture at 423 K, an elevated temperature. It showed a high water/methanol separation performance; its water/methanol separation factor was 2726 and the total flux, 1.02 kg/m 2 h. The high small gases and water separation performances were because interparticular voids between the nano size seeds were small and the surface of seed layer was flat. Therefore, the secondary growth remained a continuous zeolite layer with few non-zeolitic pores. In the present work, it was well proven experimentally that application of nanosize seed is an effective option to prepare high performance zeolite membrane in H-SOD zeolite system. • High purity H-SOD zeolite particles with a mean diameter of 80 nm were carefully prepared for the secondary growth of H-SOD zeolite membranes. • Synthesis temperature, time and NaOH concentrations played major roles on the particle size. • The H-SOD zeolite membranes prepared by using the nanosize seeds showed excellent performances for H 2 /CO 2 , H 2 /N 2 and water/methanol separations. • The good performance was due to smaller interparticular voids between nano size seeds and the increased surface flatness of seed coating layer.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.