Abstract
Introduction. Optimization is a criterion, on the ground of which, comparative estimation of possible alternatives and selection of the best decisions is carried out. Cost of a shell, its minimum weight, absence of bending moments and tensile normal stresses, given stress state for acting external load, given bearing capacity when optimal shallowness, maximum external load, minimum weight under limitation on the value of natural frequencies of vibration and maximum displacements, absence of bending moments with taking into account internal pressure, dead weight, and centrifugal forces; maximum of critical force and something else can be criterion of selection of optimal shape of shell of revolution. Methods. The main criteria of optimality for shells of revolution and information sources for the 1970-2019 periods are presented in a paper. It will help to study previous results devoted to using optimizations and to set about further investigation. But there is no single approach to the definition of optimal shell of revolution and obviously will not be, because own optimizations are necessary for every concrete case of loading, or distribution of stresses along the thickness, or under the demands to the ratio of the volume and area of considered shell, or with due regard for different kind of expenses, and other demands. Results. For the first time, 24 criteria of optimality only for shells of revolution were discovered. The names of scientists offered presented criteria of optimality and the 45 references dealing with this question are pointed out. It is shown that principles put in the basis of optimal design and criteria of optimality must be given with the help of language quite naturally for computer. Having used optimi- For citation Krivoshapko S.N. (2019). Optimal shells of revolution and main optimizations. Structural Mechanics of Engineering Constructions and Buildings, 15 (3), 201-209. http://dx.doi.org/ 10.22363/1815-5235-2019-15-3-201-209 zations presented in the paper, designers can choose the criterion for their own design of optimal shell shape. Study of the prerequisites of the structural solutions in building and machine-building, the history of the development and perfecting of technologies of erection of shells of revolution will permit to generalize the experience accumulated by designers and to develop new fundamental solutions. Otherwise, architects, structural engineers, and designers will be repeating the achieved solutions in building, architecture, and machine-building.
Highlights
Optimization is a criterion, on the ground of which, comparative estimation of possible alternatives and selection of the best decisions is carried out
There is no single approach to the definition of optimal shell of revolution and obviously will not be, because own optimizations are necessary for every concrete case of loading, or distribution of stresses along the thickness, or under the demands to the ratio of the volume and area of considered shell, or with due regard for different kind of expenses, and other demands
Having used optimizations presented in the paper, designers can choose the criterion for their own design of optimal shell shape
Summary
Peoples’ Friendship University of Russia (RUDN University), 6 Miklukho-Maklaya St., Moscow, 117198, Russian Federation. Article history: Received: May 3, 2019 Revised: June 3, 2019 Accepted: June 10, 2019. Optimal shells of revolution and main optimizations. Structural Mechanics of Engineering Constructions and Buildings, 15(3), 201–209.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Structural Mechanics of Engineering Constructions and Buildings
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.