Optimal rib layout design for noise reduction based on topology optimization and acoustic contribution analysis

Abstract

In this paper, an optimum rib layout design method for reducing radiated noise is proposed based on topology optimization and acoustic contribution analysis. According to radiated noise depends on acoustic transfer vector (ATV) and normal velocity, the influence of rib layout on ATV is analyzed and it is found rib layout has little influence on ATV. Only if a region has maximum acoustic contribution, the normal velocities on this region can have the most remarkable influence on radiated noise. So the determination procedure of region with maximum acoustic contribution is introduced. Based on this, the topology optimization model is established to minimize the normal velocities on this region. Ribs can be arranged according to the optimum topologies to reduce the normal velocities, which in turn results in a reduction of radiated noise. The topology optimization model is used to obtain the optimal rib layout by taking a plate-like structure as an example. The plate is fixed along all side edges and excited by a time-harmonic external point load with different prescribed frequencies. The radiated noise is simulated using the finite element method and boundary element method. Four plates are manufactured according to the optimal rib layouts for different single frequency excitation. Modal test and sound measurement are conducted to validate the proposed method. The influence of loading position on the topology optimization results is also investigated and discussed.