Abstract

In this paper, an optimal strategy is proposed for the reactive power allocation in large-scale grid-connected photovoltaic systems. Grid-connected photovoltaic systems with direct current to alternating current inverters are able to supply active power to the utility grid as well as reactive power. The active power, extracted by the direct current to alternating current inverters, is usually controlled to be around the maximum power point of the photovoltaic array attached to it. For large-scale grid-connected photovoltaic systems with multiple direct current to alternating current inverters, due to the limited apparent power transfer capability of each inverter, the reactive power needs to be allocated among the direct current to alternating current inverters in a proper way. The proposed method achieves the maximum reactive power transfer capability of the entire system by applying classic Lagrange multiplier method. The sufficient conditions of the optimal reactive power allocation strategy are provided and mathematically proved. The proposed optimal reactive power allocation strategy is then tested in a case study against a sample large-scale grid-connected photovoltaic system.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.