Optimal positioning of small wind turbines into a building using on-site measurements and CFD simulation

Abstract

Abstract Renewable energy solutions are critical for addressing several pressing issues, including climate change, the fossil fuels supply chain fragility and fuel price fluctuations. One promising technological solution is rooftop-mounted turbines into buildings. This study presents an evaluation of the potential for wind energy utilization on the rooftop of a typical 29 m tall building. The primary objective of this research is to develop a methodology that can effectively investigate the integration of small wind turbines (SWTs) into urban buildings, intending to promote energy sufficiency in urban areas. A robust framework has been developed that consists of seven fundamental steps. These steps include site selection, evaluating urban wind energy with computational fluid dynamics (CFD) simulation and on-site measurements, selecting an appropriate SWT, estimating the annual energy production (AEP), conducting an evaluation of the environmental impact, resilience, and economic analysis, and finally, installing the system. This straightforward yet reliable framework provides a comprehensive approach to assessing the viability of wind energy utilization in urban areas. The findings revealed that the most suitable location for installation had an estimated AEP of around 1030 kWh, leading to a reduction in emissions of 0.64 tCO2/y. Additionally, it was observed that the building's geometry significantly affected the wind flow, causing a substantial decrease in wind speed downstream. A significant decline in wind speed, up to 100% from wind incidence to the opposite end, can greatly impact energy generation. With less kinetic energy available, SWTs may generate less electrical energy. Selecting optimal sites and considering wind patterns is crucial for maximizing energy generation in wind energy projects.