Abstract
The present work provides an investigation of the technical and economic feasibility of integrating Concentrating Solar Power (CSP) technologies with cogeneration gas turbine systems that are progressively being installed in Saudi Arabia to produce electricity and steam. In this regard, different designs of hybrid solar/fossil fuel gas turbine cogeneration systems have been proposed. The proposed designs consider the possible integration of three main Concentrating Solar Power (CSP) technologies, which are namely, Solar Tower (ST) systems, Parabolic Trough Collector (PTC) system, and Linear Fresnel Reflector (LFR) systems with conventional gas turbine cogeneration systems. These three CSP technologies were assessed for possible integration with a gas turbine cogeneration system that generates steam at a constant flow rate of 81.44kg/s at P=45.88 (bar) and temperature of T=394°C throughout the year in addition to the generation of electricity. THERMOFLEX with PEACE simulation software has been used to assess the performance of the integrated solar gas turbine cogeneration with three different CSP technologies for different gas turbine sizes under Dhahran weather conditions. The three CSP technologies to be integrated individually to the gas turbine cogeneration plant are; parabolic trough collectors and linear Fresnel reflectors to the steam side and the solar tower to the gas side of the plant. Thermo-economic comparative analysis have been conducted for all possible configurations of the integrated solar gas turbine cogeneration plant to reach at the optimal levelized electricity cost (LEC). The optimization process also includes CO2 emissions for each integrated solar gas turbine cogeneration plant (ISGCP) configuration for each the three CSP technologies in comparison with the integration of CO2 capture technology to the conventional plant. The simulation results revealed that the optimal configuration is the integration of LFR with the steam side of a gas turbine cogeneration plant of 50MWe, which gives a LEC of 5.1USȻ/kWh with 119kton reduction of the annual CO2 emission. Moreover, the results indicate that the proper location to apply optimal integration configuration in Saudi Arabia is at Jazan city.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.