Abstract

Power system restoration must be accomplished as soon as possible after a blackout. In this process, available black-start (BS) units are used to provide cranking power to non-black-start (NBS) units so as to maximize the overall power system generation capacity. This procedure is known as the generation start-up problem, which is intrinsically combinatorial with complex non-linear constraints. This paper presents a new mixed integer linear programming (MILP) formulation for the generation start-up problem that integrates non-conventional renewable energy sources (NCRES) and battery energy storage systems (BESS). The main objective consists of determining an initial starting sequence for both BS and NBS units that would maximize the generation capacity of the system while meeting the non-served demand of the network. The nature of the proposed model leads to global optimal solutions, clearly outperforming heuristic and enumerative approaches, since the latter may take higher computational time while the former do not guarantee global optimal solutions. Several tests were carried out on the IEEE 39-bus test system considering BESS as well as wind and solar generation. The results showed the positive impact of NCRES in the restoration processes and evidenced the effectiveness and applicability of the proposed approach. It was found that including NCRES and BESS in the restoration process allows a reduction of 24.4% of the objective function compared to the classical restoration without these technologies.

Highlights

  • IntroductionPublisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations

  • That considers the effect of non-conventional renewable energy sources (NCRES), the objective function decreased 10.37% compared to the first scenario

  • This paper presented a mixed integer linear programming model to solve the optimal generation start-up problem integrating non-conventional renewable energy sources and battery energy storage systems

Read more

Summary

Introduction

Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations. The development of new technologies in power systems has led to more flexible and robust networks; the risk of a total power system blackout is still present. There are many situations that may cause power system blackouts such as transmission line tripping and overloading, failure of protection or control systems, voltage collapse and cyber attacks, among others [1]. Power system blackouts around the world, such as the 2003

Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call