Abstract
AbstractAn over‐actuated control system has the advantage of being able to use redundant actuators to reconfigure the control system and it can realize fault tolerant control. In order to achieve improved vehicle stability and handling performance for electric vehicles with in‐wheel steering and driving motors, the control of the vehicle body slip angle and yaw rate is actually an over‐actuated control problem. To obtain the optimal solution for this control problem, this study proposes a two‐level tire force distribution control method, where the upper level controller calculates the desired lateral and longitudinal forces generated by friction on the tire of each wheel according to the driver's steering and driving inputs. The lower level controller maps the desired tire forces into the input of each steering actuator and driving actuator. Unlike the linear mapping method applied in most of the current research, this study develops a proportional‐integral (PI) controller for each actuator so that the non‐linear tire characteristics can be counteracted. In addition, since the PI controllers for eight actuators (four steering actuators and four driving actuators) have a total of 16 control gains to be determined, a genetic algorithm is applied to accurately determine these control gains. The simulation results are presented to validate the control performance of the proposed tire force allocation method.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
