Abstract

ABSTRACT 5kmDCF-50kmG652 fiber dispersion compensation FRA pumped by three-wavelength Raman fiber laser has been researched. Dispersion and dispersion slope can be compensated in the dispersion compensation FRA simultaneously. Cascaded pump fiber laser is an all fiber technology, and high output power above 3W can be achieved. The Raman fiber lasers which operating at wavelengths of 1428,1455 and 1466nm have been used to simultaneously pump dispersion compensation fiber Raman amplifier. Simulated annealing algorithm is adopted to give automatic pump power configuration in multiwave backward-pumped dispersion compensation FRA. Simulated annealing algorithm imitates physical annealing process in order to seek the most optimal key. We studied the dispersion compensation FRA with the pump power configuration of optimal design in experiment, and the spectrums of gain and noise figure (NF) have been measured. When pump power is 1250mw and signal power is 0dBm,we get 55nm flat-gain bandwidth, and noise figure is less than –0.93dB, while the gain flatness is less than 3dB and gain is more than 21.32dB;when pump power is 1500mw,we get 45nm flat-gain bandwidth, and noise figure is less than -1.79dB,while the gain flatness is less than 3dB and gain is more than 27.77dB.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.