Optimal Configuration of Vortex Generator for Heat Transfer Enhancement in a Plate-Fin Channel

Abstract

Heat transfer is a naturally occurring phenomenon and its augmentation is a vital research topic for many years. Although, vortex generators (VGs) are widely used to enhance the heat transfer of plate-fin type heat exchangers, few researches deal with its thermal optimization. This work is dedicated to the numerical investigation and optimization of VGs configuration in a plate-fin channel. Three-dimensional (3D) numerical simulations are performed to study the effect of angle of attack and attach angle (angle between VG and wall) and shape of VG on the fluid flow and heat transfer characteristics. The flow is assumed as steady-state, incompressible, and laminar within the range of studied Reynolds numbers (Re = 380–1140). Results are presented in the form average and local Nusselt number and friction factor. The effect of attach angle is highlighted and the results show that the attach angle of 90 deg may not be necessary for enhancing the heat transfer. The flow structure and heat transfer characteristics of certain cases are examined in detail. The parameters of VG are then optimized for maximum heat transfer and minimum pressure drop. The three independent design parameters are considered for the two objective functions. For this purpose, computation fluid dynamics (CFD) data, response surface methodology (RSM) and a multi-objective optimization algorithm (MOA) are combined. The data obtained from numerical simulations are used to train a Bayesian-regularized artificial neural network (BRANN). This in turn is used to drive a MOA to find the optimal parameters of VGs in the form of Pareto front. The optimal values of these parameters are finally presented.