Abstract
This paper presents a mathematical model for determining optimal configuration of plate finned tube condensers widely used in air conditioning system. The condenser investigated in this work is a cross-flow air-refrigerant type with aluminium plain fin geometry. Refrigerant HFC 134a flows inside while air flows outside the copper tubes. Minimum entropy change of air and refrigerant is used as the criterion for analysis. This entropy change resulting from losses due to heat transfer and pressure drop can be represented in a form of entropy generation number, N s . The proposed mathematical model is divided into three regions: superheated, two-phase and sub-cooled regions. Effects of heat transfer and pressure drop of air side and refrigerant side on entropy generation rate are simultaneously analyzed through the implicit method. Results from the mathematical model show that entropy generation number decreases with increasing fin pitch and decreasing number of rows and tube diameter. In addition, this work also presents an optimal configuration of condenser. The optimal tube diameter and the number of fin per inch are 6.35–12.7 mm ( 1 4 – 1 2 inch) and 11–12, respectively.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
