Abstract
PurposeThe proposed metamaterial absorber (MMA) has the following advantages: first, the structure of the MMA consists of one planar metallic resonator, which presents a new design approach to obtain a multiband absorption response, rather than using multiple unit-cells in the one large unit cell or stacking different layers. Second, the simultaneous realization of triple-band and dual-band absorption (or bi-functional absorption) at five different frequencies can integrate the respective advantages of the triple functions of the triple-band MMA and double-band MMA, and therefore, the bi-functional MMA will find more application prospects than multiple-functional devices of triple-band and dual-band. Third, the authors simulated the three combinations of MMA here, which is indium tin oxide (ITO)-Polyimide-ITO, ITO-Teflon-ITO and ITO-polyethylene terephthalate (PET)-ITO for the same planar structure and achieve a high absorption rate. Finally, the proposed structure is polarization and angle independent in nature.Design/methodology/approachThis absorption device consists of the top circular resonator, the middle insulating SiO2 medium layer and the bottom metallic copper ground plane placed on a substrate. The conductivity of the copper metal is s = 5.8 × 107 s/m. As the transmission of the MMA structure is zero, the substrate materials can be selected randomly. Totally four combinations of terahertz MMA are designed and simulated here which are ITO- SiO2 –ITO, ITO-Polyimide-ITO, ITO-Teflon-ITO and ITO- PET-ITO for the same planar structure.FindingsCompared with previous MMAs, the proposed MMA has the following advantages: First, the structure of the MMA consists of one planar metallic resonator, which presents a new design approach to obtain a multiband absorption response, rather than using multiple unit-cells in the one large unit cell or stacking different layers. Second, the simultaneous realization of triple-band and dual-band absorption (or bi-functional absorption) at five different frequencies can integrate the respective advantages of the triple functions of the triple-band MMA and double-band MMA, and therefore, the bi-functional MMA will find more application prospects than multiple-functional devices of triple-band and dual-band. Third, the authors simulated the three combinations of MMA here, which is ITO-polyimide-ITO, ITO-Teflon-ITO and ITO- PET-ITO for the same planar structure and achieve a high absorption rate. Finally, the proposed structure is polarization and angle independent in nature.Originality/valueFirst, the structure of the MMA consists of one planar metallic resonator, which presents a new design approach to obtain a multiband absorption response, rather than using multiple unit-cells in the one large unit cell or stacking different layers. Second, the simultaneous realization of triple-band and dual-band absorption (or bi-functional absorption) at five different frequencies can integrate the respective advantages of the triple functions of the triple-band MMA and double-band MMA, and therefore, the bi-functional MMA will find more application prospects than multiple-functional devices of triple-band and dual-band. Third, the authors simulated the three combinations of MMA here, which is ITO-polyimide-ITO, ITO-Teflon-ITO and ITO-PET-ITO for the same planar structure and achieve a high absorption rate. Finally, the proposed structure is polarization and angle independent in nature.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.