Optical Study on Co-Sensitization of Betanin Dye with Cadmium Sulfide to Fabricate Dye Sensitized Solar Cell

Abstract

Natural dyes are low-cost, eco-friendly, readily available and have optical characteristics which render them useful in energy research. The titanium tetra isopropoxide precursor can be employed using sol-gel synthesis to get titanium dioxide nanoparticles (TiO2 NPs). The FESEM analysis confirmed the deposition of TiO2 NPs on Indium Tin Oxide (ITO) substrate, which is necessary for the photo-conversion mechanism to produce electricity. One of the natural dyes that is extracted from red beets is known as betanin dye (Bd). Due to their aligned energy levels, Bd and cadmium sulfide (CdS) are used together to provide effective optical characteristics, making them suitable as dye sensitizers. The presence of Cd-S, C-N and hydroxyl groups assigned to 500, 1633, and 3300 cm-1 respectively, was demonstrated by the FTIR analysis. The energy gap of 2.16, 2.13 and 2.2 eV for Bd, CdS and Bd-CdS composite was estimated using Tauc's plot and UV-visible spectra demonstrated maximum absorbance at 485, 510 and 528 nm, respectively. The Bd absorbs broad light in visible region due to the addition of CdS. The major charge-transport phenomenon in dye-sensitized solar cells (DSSC) involves an increase in photo-current density, due to its luminous nature. However, the recombination of charge carriers prevents the overall performance of the DSSCs. The power conversion efficiency of the DSSC constructed from Bd dye and Bd-CdS composite was 0.234% and 0.367%, respectively. This optical investigation suggests co-sensitization as a sure-fire method to improve the efficiency of DSSCs extracted from natural dyes, making them reliable for future indoor applications.