Abstract
A stable passive mode-locking regime for a Yb3+ :KY(WO4)2 laser with optical pumping by a continuous diode laser was obtained using two types of optical shutter with a saturable absorber based on coupled GaAs/In0.25Ga0.75As/GaAs quantum wells. The shutters differed in their reflecting part: the first type was a semiconductor mirror and the second type was a dielectric one. The typical parameters of the mode-locking regime were as follows: a pulse duration of about 200 fs for both types of shutter, an average power of 2.54 W for the all-semiconductor shutter (SESAM) and 0.92 W for the dielectric mirror with a saturable absorber (DSAM). The efficiency relative to the incident pump power was 57% for the SESAM and 19% for the DSAM. The maximum pulse repetition rate was 982 MHz. The measured recovery time was about 2 ps for both saturable absorbers. The mirror damage threshold estimate for the SESAM was at least 8.87 mJ cm−2.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
