Abstract
Metakaolin, which is part of a class of inorganic polymers called geopolymers, is being tested currently for its use as a lightweight mirror material in spacecraft applications. Metakaolin, as with most geopolymers, has the advantages of low initial coefficient of thermal expansion, easy preparation at room temperature and pressure, and high specific strength. Even though metakaolin has been known as a structural material for millennia, it has not been properly vetted for use as a material in spacecraft applications, especially with respect to exposure to its environments. This research highlights one particular aspect of response to the space environment; that is, how do the optical properties of metakaolin change after subjugation to bombardment by ultraviolet and high energy electron radiation? These two radiation sources are common in low earth orbit and a primary cause of degradation of organic polymers in space. Photospectroscopic analysis showed that ultraviolet in combination with high energy electrons causes changes in the metakaolin which need to be accounted for due to their potential impacts on the thermal management of a spacecraft and during application in composite mirror structures.
Highlights
The primary choice of mirror material for spacecraft imaging optics, since the beginning of the space age, has been monolithic glass
Even though metakaolin has been known as a structural material for millennia, it has not been properly vetted for use as a material in spacecraft applications, especially with respect to exposure to its environments
This research highlights one particular aspect of response to the space environment; that is, how do the optical properties of metakaolin change after subjugation to bombardment by ultraviolet and high energy electron radiation? These two radiation sources are common in low earth orbit and a primary cause of degradation of organic polymers in space
Summary
The primary choice of mirror material for spacecraft imaging optics, since the beginning of the space age, has been monolithic glass. Material performance requirements for the future space mirrors for advanced imaging missions necessitate a lower areal density than glass with similar if not superior mechanical strength. There is a specific concern with any material, including geopolymers, and it is about the behavior under the radiation environment encountered in orbit. Previous investigations, both on the ground and in-flight experiments, have shown that significant degradation of the organic polymer strength occurs due to the increased cross-linking of polymer networks after absorbing the radiation emitted from the sun or deep space. Previous work has shown that for some inorganics, such as siloxane polymers, UV exposure effects were seen as early as after 20-hour exposure [3]
Sign-in/Register to view highlights & summary Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
