Optical Oxygen Sensor Patch Printed with Polystyrene Microparticles-based Ink on Flexible Substrate.

Abstract

Optical oxygen sensors based on photoluminescence quenching have gained increasing attention as a superior method for continuous monitoring of oxygen in a growing number of applications. A simple and low-cost fabrication technique was developed to produce sensor arrays capable of two-dimensional oxygen tension measurement. Sensor patches were printed on polyvinylidene chloride film using an oxygen-sensitive ink cocktail, prepared by immobilizing Pt(II) mesotetra(pentafluorophenyl)porphine (PtTFPP) in monodispersed polystyrene microparticles. The dispersion media of the ink cocktail, high molecular weight polyvinyl pyrrolidone suspended in 50% ethanol (v/v in water), allowed adhesion promotion and compatibility with most common polymeric substrates. Ink phosphorescence intensity was found to vary primarily with fluorophore concentration and to a lesser extent with polystyrene particle size. The sensor performance was investigated as a function of oxygen concentrations employing two different techniques: a multi-frequency phase fluorometer and smart phone-based image acquisition. The printed sensor patch showed fast and repetitive response over 0-21% oxygen concentrations with high linearity (with R2 >0.99) in a Stern-Volmer plot, and sensitivity of I0/I21 >1.55. The optical sensor response on a surface was investigated further using two-dimensional images which were captured and analyzed under different oxygen environment. Printed sensor patch along with imaging read-out technique make an ideal platform for early detection of surface wounds associated with tissue oxygen.