Abstract

The modal gain, modal loss and spontaneous emission of a GaAsSb-based type-II quantum-well (QW) laser structure emitting at 1.3 mum have been experimentally determined as a function of current injection and temperature. The system is able to provide a maximum of 900 cm-1 of material gain from the n = 1 transition despite an electron-hole overlap of 32%, however, the gain from the n = 2 transition becomes dominant before this value can be achieved. The presence of the n = 2 transition has a detrimental effect on device performance, limiting the usable gain from the first transition and increasing the total radiative recombination current. Energy level calculations show that reducing the hole QW to 4 nm would increase the separation of the n = 1 and n = 2 transition by a further 45 meV, reducing the limiting effect of the transition. Carrier distribution spectra show the carriers are in thermal equilibrium for the temperatures and injection currents studied. A low radiative efficiency for this structure is measured due to a very large nonradiative current. We believe a combination of different mechanisms contribute to the nonradiative current.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.