Optical frequency dissemination via 103-km urban fiber link with remote passive phase stabilization

Abstract

In this paper, we propose a technique for a fiber-based optical frequency dissemination system with remote passive phase noise cancellation. At the remote site, a 1×2 fiber pigtailed acousto-optic modulator (AOM) with two diffraction order outputs (0 and −1 order) is employed as the phase-compensated device, the undesired phase noise of fiber link introduced by environmental perturbations are passively canceled at remote sites. Different from other existing schemes, the proposed technique harnesses the benefits of remote radio frequency (RF) independence and low-temperature sensitivity in this noise-suppression configuration. Consequently, the system noise floor of the proposed optical frequency dissemination system achieves 9.44 × 10−21 without requiring a precise remote RF reference, and the phase-temperature coefficient is reduced to about 2 fs/K. A real-world experiment is conducted over a noisy round-trip 103 km urban fiber link. After being passively compensated, we demonstrate a fractional frequency instability of 1.57 × 10−14 at the integration time of 1 s and scales down to 3.96 × 10−20 at 10,000 s in terms of modified Allan deviation. The frequency uncertainty of the retrieved light after transferring through this noise-compensated fiber link relative to that of the input light achieves 1.80 × 10−18. This work demonstrates the system’s capability to disseminate the ultra-stable optical frequency standards and is a significant step towards realizing multi-node dissemination of the state-of-the-art optical clock signal with remote noise compensation via a tree-like topology fiber network.