Abstract

Using UV–VIS–NIR spectroscopy and spectroscopic ellipsometry (SE) techniques, we studied the optical characteristics of Sb2S3 thin films produced by a one-step thermal evaporation process and annealed for 2 h at various temperatures under vacuum atmosphere. The X-ray diffraction study shows that a structural transition from amorphous to polycrystalline nature occurred at vacuum annealing temperature of 200 °C. According to UV–VIS–NIR spectroscopic measurements, the Sb2S3 films showed a high absorption coefficient in the visible region (α > 104 cm−1) and a direct band gap energy that decreases from 2.00 eV to 1.63 eV as the annealing temperatures increase. Furthermore, we calculate the optical constants of the elaborated Sb2S3 films, such as refractive index n and extinction coefficient k, by fitting the ellipsometric measurements of the pseudo-refractive index < n > and the pseudo-extinction coefficient < k > . It was observed that the obtained values for n at 800 nm are 2.7, 2.9, 3.5, and 4.0 for as-deposited and annealed films, respectively, at 150, 200, and 250 °C. The dielectric properties were also determined using the Wemple DiDomenico (WDD) and Spitzer-Fan models.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.