Abstract
In this paper, we present our results for the anisotropic refractive index measurements of commonly used liquid crystal (LC) materials (E7 and 5CB) in the whole visible–near infrared range. In order to achieve a high accuracy in the obtained values, we have employed a combination of two techniques, namely, Mueller matrix spectroscopic ellipsometry in transmission and half-leaky-guided-mode (HLGM). Measurements with the HLGM technique are usually performed at a single wavelength. In order to obtain a spectroscopic measurement based on the HLGM technique in a wide wavelength range, we modified our commercial VASE® ellipsometer. In particular, we designed a sample holder by means of which measurements in guiding structures are also possible. Thus, we take advantage of the wide-spectrum light, emitted from a standard Xe lamp of the ellipsometer, also in the HLGM setup. The complementary and in-one-setup utilization of both techniques has allowed us to overcome most of the problems previously encountered in applying spectroscopic ellipsometry to the determination of the optical parameters of LC materials and eventually to achieve an accuracy in the obtained results of the order of 10−4. We discuss how individual elements of the Mueller matrix can be used to this aim. Finally, we compare the dispersion curves for the refractive indices and the birefringence of E7 and 5CB with the data already existing in the literature.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.