Optical biosensors using plasmonic and photonic crystal band-gap structures for the detection of basal cell cancer

Abstract

One of the most interesting topics in bio-optics is measuring the refractive index of tissues. Accordingly, two novel optical biosensor configurations for cancer cell detections have been proposed in this paper. These structures are composed of one-dimensional photonic crystal (PC) lattices coupled to two metal–insulator–metal (MIM) plasmonic waveguides. Also, the tapering method is used to improve the matching between the MIM plasmonic waveguides and PC structure in the second proposed topology. The PC lattices at the central part of the structures generate photonic bandgaps (PBGs) with sharp edges in the transmission spectra of the biosensors. These sharp edges are suitable candidates for sensing applications. On the other hand, the long distance between two PBG edges causes that when the low PBG edge is used for sensing mechanism, it does not have an overlapping with the high PBG edge by changing the refractive index of the analyte. Therefore, the proposed biosensors can be used for a wide wavelength range. The maximum obtained sensitivities and FOM values of the designed biosensors are equal to 718.6, 714.3 nm/RIU, and 156.217, 60.1 RIU−1, respectively. The metal and insulator materials which are used in the designed structures are silver, air, and GaAs, respectively. The finite-difference time-domain (FDTD) method is used for the numerical investigation of the proposed structures. Furthermore, the initial structure of the proposed biosensors is analyzed using the transmission line method to verify the FDTD simulations. The attractive and simple topologies of the proposed biosensors and their high sensitivities make them suitable candidates for biosensing applications.