Abstract

Abstract. Optical and microphysical properties of different aerosol types over South Africa measured with a multi-wavelength polarization Raman lidar are presented. This study could assist in bridging existing gaps relating to aerosol properties over South Africa, since limited long-term data of this type are available for this region. The observations were performed under the framework of the EUCAARI campaign in Elandsfontein. The multi-wavelength PollyXT Raman lidar system was used to determine vertical profiles of the aerosol optical properties, i.e. extinction and backscatter coefficients, Ångström exponents, lidar ratio and depolarization ratio. The mean microphysical aerosol properties, i.e. effective radius and single-scattering albedo, were retrieved with an advanced inversion algorithm. Clear differences were observed for the intensive optical properties of atmospheric layers of biomass burning and urban/industrial aerosols. Our results reveal a wide range of optical and microphysical parameters for biomass burning aerosols. This indicates probable mixing of biomass burning aerosols with desert dust particles, as well as the possible continuous influence of urban/industrial aerosol load in the region. The lidar ratio at 355 nm, the lidar ratio at 532 nm, the linear particle depolarization ratio at 355 nm and the extinction-related Ångström exponent from 355 to 532 nm were 52 ± 7 sr, 41 ± 13 sr, 0.9 ± 0.4 % and 2.3 ± 0.5, respectively, for urban/industrial aerosols, while these values were 92 ± 10 sr, 75 ± 14 sr, 3.2 ± 1.3 % and 1.7 ± 0.3, respectively, for biomass burning aerosol layers. Biomass burning particles are larger and slightly less absorbing compared to urban/industrial aerosols. The particle effective radius were found to be 0.10 ± 0.03, 0.17 ± 0.04 and 0.13 ± 0.03 µm for urban/industrial, biomass burning, and mixed aerosols, respectively, while the single-scattering albedo at 532 nm was 0.87 ± 0.06, 0.90 ± 0.06, and 0.88 ± 0.07 (at 532 nm), respectively, for these three types of aerosols. Our results were within the same range of previously reported values.

Highlights

  • Atmospheric aerosols of natural and anthropogenic origin contribute substantially to global climate variability (IPCC, 2013)

  • We present aerosol lidar ratios, particle linear depolarization ratios and Ångström exponents for biomass burning and urban/industrial aerosol layers measured with a multi-wavelength Raman lidar

  • Our results indicate that biomass burning aerosols have lower lidar ratios when they are mixed with either desert dust aerosols or urban/industrial aerosols

Read more

Summary

Introduction

Atmospheric aerosols of natural and anthropogenic origin contribute substantially to global climate variability (IPCC, 2013). Giannakaki et al (2015) used Raman lidar data obtained over a 1-year period at Elandsfontein in South Africa (26◦15 S, 29◦26 E, 1745 m above sea level, a.s.l.) to study the geometrical characteristics and intensive and extensive optical properties of free-tropospheric aerosol layers. In addition to these characteristics that can be determined with lidar data, multiwavelength Raman lidar measurements can be used to determine profiles of microphysical particle properties by using inversion algorithms (Twomey, 1977; Veselovskii et al, 2002; Müller et al, 2001).

Measurement site
Description of the lidar system and lidar data processing
Retrieval of microphysical properties
Aerosol classification
Results and discussion
Summary and conclusions
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call