Optical and Color Investigation of the Effect of Laser Radiation on Polyaniline/Polyvinyl Pyrrolidone/Zinc Sulfide Nanocomposite Films

Abstract

A nanocomposite (NC) of polyaniline (Pani), polyvinyl pyrrolidone (PVP) and zinc sulfide (ZnS) nanoparticles (NP) was prepared using chemical coprecipitation and ex-situ casting procedures. ZnS NP were synthesized using the chemical coprecipitation technique in atmospheric air. The x-ray diffraction (XRD) scans indicated that the synthesized ZnS had a nanonature and fit the cubic zinc blended structure. We used an infrared pulsed laser to irradiate the Pani/PVP/ZnS NC samples with fluences ranging from 3 to18 J/cm2. The induced changes in the NC were investigated using the UV spectroscopy and International Commission on Illumination (CIE) color difference methodology. When the laser fluence increased up to 18 J/cm2 both the direct and indirect optical bandgaps (Eg) decreased. Additionally, we used the optical dielectric loss (ε”) to detect the type of microelectronic transition for the NC samples. The Eg of the exposed NC samples and the pristine samples exhibited indirect allowed transitions. The laser effects on the absorbance, extinction coefficient, transmission, refractive index, dielectric parameters and optical conductivity of the NC were studied. Lastly, the color differences between the pristine and exposed samples were determined. The pristine Pani/PVP/ZnS showed a significant color difference with the laser irradiated samples. The changes of the studied optical parameters with the laser fluence indicated that the laser radiation represents a convenient tool that would allow the application of Pani/PVP/ZnS NC in optoelectronic devices.