Operation of Stand-Alone Microgrids Considering the Load Following of Biomass Power Plants and the Power Curtailment Control Optimization of Wind Turbines

Abstract

Various stand-alone hybrid power systems are widely used to fulfil the electric loads for remote, rural villages. Although there are many investigations based on various aspects of renewable hybrids energy microgrids, the discussions about the application of biomass combustion power plants are rare. Also, detailed investigations of the system steady and transient stability analysis, and the power curtailment control optimization of wind turbines in these stand-alone hybrid systems are seldom found. This paper focuses on wind/biomass/diesel/battery stand-alone microgrids and discusses the system operation, energy management and dispatch issues detailed. The renewable and controllable biomass power is localized to follow the load fluctuations over a long timescale to decrease the power production from diesel and the peak-load shifting demands of the battery banks. An optimization strategy of the wind power curtailment control is also proposed to effectively decrease the frequency and amplitude of the pitch actor and, to some extent, improve the power generation through the combination of the active turbine speed control and pitch regulation. Then a parallel double-mode optimal operation strategy with a “fault detector” is presented to realize economic optimization dispatch under the normal mode and emergency power control for large disturbance scenarios. Finally, case studies of a microgrid on a remote Canadian aboriginal community are conducted to demonstrate the performance of the proposed methods.