Operation of semi-batch emulsion polymerisation reactors: Modelling, validation and effect of operating conditions

Abstract

A detailed dynamic model was developed for a styrene emulsion polymerisation semi-batch reactor to predict the evolution of the product particle size distribution (PSD) and molecular weight distribution (MWD) over the entire range of monomer conversion. A system exhibiting zero-one kinetics was employed, with the model comprising a set of rigorously developed population balance equations to predict monomer conversion, PSD and MWD. The modelling equations included diffusion-controlled kinetics at high monomer conversion where the transition from the zero-one regime to a pseudo-bulk regime occurs. The model predictions were found to be in good agreement with experimental results. Both particle growth and the PSD were found to be strongly affected by the monomer feedrate. Reactor temperature had a major influence on the MWD which was, however, insensitive to changes in the monomer feedrate. These findings were confirmed experimentally. As a result, it seems reasonable to propose that the use of the monomer feedrate to control the PSD and the reactor temperature to control the MWD are appropriate in practical situations. Consequently, an optimal monomer feed trajectory was developed off-line (using the validated reactor simulation) and verified experimentally by producing a polymer with specific PSD characteristics.