Operando Visualization of Redox Flow Batteries Using Fluorescence Spectroscopy with Alizarin Red S Electrolyte

Abstract

Redox flow batteries (RFBs) charge and discharge by transferring electrons between two pairs of redox species separated by a proton exchange membrane. Unlike traditional batteries that store energy in redox-active materials within an enclosed cell, RFBs store energy in liquid electrolytes housed in external reservoirs1. These electrolytes are pumped through the cell, enabling redox reactions on the surface of electrodes. The energy storage capacity of RFBs is determined by the concentration of the active species and the size of the reservoirs, making them a promising technology for large-scale energy storage applications2. While RFBs possess advantages such as long lifetime, flexible design for battery capacity and power, and rapid response, they suffer from drawbacks like low energy density, power density, and energy efficiency3. Efforts to address these issues have primarily focused on modifications to the electrode materials or the flow field4 , 5. However, evidence supporting performance enhancements often relies on global parameters such as energy efficiency, energy density, and voltage drop, lacking detailed mechanistic and microscopic studies. Real-time observation of the electrode-electrolyte interface during redox reactions and the transport of redox species in the flow field holds the potential to significantly contribute to understanding the electrode structure and mass transport phenomena in RFBs6. This understanding, in turn, facilitates prediction and purposeful enhancement of battery performance by developing desirable structures for both electrode and flow fields. Microscopy, particularly confocal microscopy, serves as a powerful tool for observing microscopic structures. Confocal microscopes yield sharper images with higher resolution than widefield microscopy, enabling rapid acquisition of high-resolution images.In this study, we employed a confocal laser scanning microscope for operando visualization of RFBs. We designed a transparent framework for the battery, allowing light to pass through, and covered its surface with a glass cover to visualize the porous carbon electrode. We selected a fluorescent redox-active species, Alizarin Red S to enable visualization using fluorescence spectroscopy. Leveraging its unique fluorescence properties, we established a correlation between fluorescence intensity and the state of charge. This innovative approach enables us to observe the distribution of electrolytes, the dynamics of redox reactions on the electrode surface (with fast speed of imaging ＜0.2s), the mass transfer behavior of the electrolyte on the electrode surface, and the uniformity of electrolyte flow in the flow field, including areas of stagnation or recirculation. Zhang, J. et al. An all-aqueous redox flow battery with unprecedented energy density. Energy Environ. Sci. 11, 2010–2015 (2018).Rubio-Garcia, J., Kucernak, A. & Charleson, A. Direct visualization of reactant transport in forced convection electrochemical cells and its application to redox flow batteries. Electrochem. commun. 93, 128–132 (2018).Tolmachev, Y. V. Flow Batteries From 1879 To 2022 And Beyond. Qeios 1–79 (2023).Wang, R. et al. Gradient-distributed NiCo2O4 nanorod electrode for redox flow batteries: Establishing the ordered reaction interface to meet the anisotropic mass transport. Appl. Catal. B Environ. 332, 122773 (2023).Kumar, S. & Jayanti, S. Effect of flow field on the performance of an all-vanadium redox flow battery. J. Power Sources 307, 782–787 (2016).Wong, A. A., Rubinstein, S. M. & Aziz, M. J. Direct visualization of electrochemical reactions and heterogeneous transport within porous electrodes in operando by fluorescence microscopy. Cell Reports Phys. Sci. 2, 100388 (2021).