Operando Fabricated Quasi-Solid-State Electrolyte Hinders Polysulfide Shuttles in an Advanced Li-S Battery

Abstract

Lithium-sulfur (Li-S) batteries are a promising option for energy storage due to their theoretical high energy density and the use of abundant, low-cost sulfur cathodes. Nevertheless, several obstacles remain, including the dissolution of lithium polysulfides (LiPS) into the electrolyte and a restricted operational temperature range. This manuscript presents a promising approach to addressing these challenges. The manuscript describes a straightforward and scalable in situ thermal polymerization method for synthesizing a quasi-solid-state electrolyte (QSE) by gelling pentaerythritol tetraacrylate (PETEA), azobisisobutyronitrile (AIBN), and a dual salt lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) and lithium nitrate (LiNO3)-based liquid electrolyte. The resulting freestanding quasi-solid-state electrolyte (QSE) effectively inhibits the polysulfide shuttle effect across a wider temperature range of −25 °C to 45 °C. The electrolyte’s ability to prevent LiPS migration and cluster formation has been corroborated by scanning electron microscopy (SEM) and Raman spectroscopy analyses. The optimized QSE composition appears to act as a physical barrier, thereby significantly improving battery performance. Notably, the capacity retention has been demonstrated to reach 95% after 100 cycles at a 2C rate. Furthermore, the simple and scalable synthesis process paves the way for the potential commercialization of this technology.