Abstract
AbstractConstructing crystalline covalent organic frameworks (COF) robust 3D reusable macroscopic objects exposing more adsorption sites with high water flux for use as a filter is an unresolved challenge. A simple scalable procedure is shown for making a robust, highly compressible 3D crystalline COF nanowire interconnected porous open‐cell sponge. The compressive strength and Young's modulus (80% strain) of the sponge are 175 and 238 kPa, respectively. The sponge can withstand multiple compression‐release cycles and a load of 2800 times its weight without collapsing. As an exemplary application, the use of a COF sponge in the selective removal and separation of cationic model dye from a mixture of dyes in water by adsorption and filtration with >99% efficiency is shown. Depending on the dye concentration, the dye removal time can be as short as 2 min, and dye adsorption efficiency can be as high as 653 mg g−1 (COF in the sponge). During filtration, the sponges as filters show a high water flux of 2355 L h−1 m−2 under ambient conditions and maintain their performance for many cycles. The lightweight, reusability, and efficiency make present sponges sustainable materials as adsorbents and filters.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.