Open-Hole 3D Braided Composites Strength Prediction and Stress Analysis

Abstract

The stress concentration caused by notches is a common engineering issue for composite structure application. 3D braided composite possess excellent damage tolerance compared to common laminates. The tensile properties of 3D braided composite with open-hole and un-notched were experimentally examined. The mechanic properties of 3D braided composite in other directions are predicted using FGM (Fabric Geometry Model) and finite element analysis. The stress distributions around the hole and perpendicular to the loading direction are analyzed based on Abaqus software. The simulation results were compared with Lekhnitskii's analytical study. The open-hole strength of 3D braided composite was predicted respectively using Average stress failure criteria, Point stress failure criteria (PSC), and also the progressive failure analysis based on different failure criteria. The predicted strength results were compared to the experimental values. The results show the PSC predicted strength matched the experiment, while the progressive failure analysis can predict the failure initiation, propagation and final failure mode.