Opaque ventilated façades: Energy performance for different main walls and claddings

Abstract

Ventilated façades can reduce heat gains through the opaque envelope of buildings, and consequently help to lower the cooling energy demand and the relative greenhouse gas emissions. However, the influence of the design features and climatic variables on their energy performance is not known enough.In this article, the influence of different parameters of the ventilated façade has been assessed. The cladding material, the relative position between mass and thermal insulation in the main wall, the air cavity geometry, and the open/closed joint configurations have been evaluated through a numerical calculation with a model that considers all these parameters, validated with experimental data.It has been observed that, in summer conditions, the best strategy to prevent heat gains is to block the energy in the outermost layers. This suggests adopting non-thermal conductor materials for claddings and the insulation of the main wall on the outer layer. Higher cavities imply a reduction of the ventilation benefits; the air remains more time in the cavity, and thus heat fluxes per unit façade area increase. On the contrary, lower air cavities allow more fresh air entrances from outside, as occurs for open joint claddings, reducing net heat gains. Additionally, widening the air cavity, up to 10 cm, results in lower average heat flux.All these different façade configurations are compared in a cradle-to-gate environmental impact assessment demonstrating that the lowest energy-demanding solution during the service life might not be the best one in the whole life cycle, thus a deeper study is needed.