On-line partial discharge insulation condition monitoring of complete high voltage (HV) networks

Abstract

Renforth et al. in 2017 present a novel online partial discharge (OLPD) high-voltage (HV) insulation condition monitoring (CM) solution to monitor complete HV networks in petrochemical and other critical industry facilities. Continuous, 24/7 OLPD insulation monitoring of in-service cables, switchgear, transformers, and rotating machines operating at 3000 V and above provides operators with an early warning against incipient HV insulation faults that manifest themselves through high PD activity. Knowledge of the type, severity, and source of any site(s) of PD across the HV network (including remotely connected plant such as Ex/ATEX HV motors located in hazardous gas zones) enables pinpointed preventative maintenance interventions to be made to the HV insulation system during planned maintenance turnarounds to avoid unplanned outages. To monitor a complete HV network, OLPD sensors and monitoring nodes are distributed at strategic locations across the network. The CM data from the distributed nodes are passed via Ethernet/LAN to a partial discharge monitoring server (PDMS) located at the control center of the facility with a secure internet connection. The PDMS operates an advanced OLPD monitoring database for the logging, display, benchmarking, trending, and visualization of the PD monitoring data on a graphical user interface. The insulation condition criticality (from 0% to 100%) of each phase of all of the individual HV plant items monitored is presented on a series of mimic screens of the HV network single-line diagram. This paper concludes with a case study of a complete HV network OLPD monitoring design solution implemented at a large, crude-oil processing facility in Eurasia.