Abstract

A new method for an on-line monitoring system for the nuclear power plants has been developed utilizing the neural networks and the expert system. The integration of them is expected to enhance a substantial potential of the functionality as operators support.The recurrent neural network and the feed-forward neural network with adaptive learning are selected for the plant modeling and anomaly detection because of the high capability of modeling for dynamic behavior. The expert system is used as a decision agent, which works on the information space of both the neural networks and the human operators. The information of other sensory signals is also fed to the expert system, together with the outputs that the neural networks generate from the measured plant signals. The expert system can treat almost all known correlation between plant status patterns and operation modes as a priori set of rules.From the off-line test at Borssele Nuclear Power Plant (PWR 480 MWe) in the Netherlands, it was shown that the neuro-expert system successfully monitored the plant status. The expert system worked satisfactorily in diagnosing the system status by using the outputs of the neural networks and a priori knowledge base from the PWR simulator. The electric power coefficient is simultaneously monitored from the measured reactive and active electric power signals.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.