Abstract

The American Dye Manufactures’ Institute (ADMI) 3 and 31 wavelength (WL) methods are the most well-known analytical methods for measuring wastewater true color. However, these two methods use a spectrophotometer as the measurement device. The measurements thus must be conducted in the laboratory and cannot provide on-line monitoring data for process control. This study applies the digital image analysis (DIA) method to develop an effective and economical method for on-line monitoring of the wastewater true color. The DIA method was used to measure three types of colored samples including the platinum-cobalt color standard solutions, synthetic colored samples and real colored samples. Experimental results show that the DIA method performed not only with good accuracy and precision but also high sensitivity in the measurement of true color. However, the DIA values present different linear relationship with the ADMI 3 and 31 WL values for different sample hues. Direct substitutions of DIA, ADMI 3 and 31 WL v...

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call