Abstract
Alkali metal compounds may have positive influences on biomass gasification by affecting char reactivity and tar reforming, but may also disturb the process by formation of deposits and agglomerates. We herein present results from online measurements of alkali compounds and particle concentrations in a dual fluidized bed gasifier with an input of 32 MWth. A surface ionization detector was used to measure alkali concentrations in the product gas, and aerosol particle measurement techniques were employed to study concentrations and properties of condensable components in the gas. Measurements were performed during start-up and steady-state operation of the gasifier. The alkali concentration increased to approximately 200 mg m-3 when fuel was fed to the gasifier and continued to rise during activation of the olivine bed by addition of potassium carbonate, while the alkali concentration was in the range from 20 to 60 mg m-3 during steady-state operation. Addition of fresh bed material and recirculated ash had...
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
