Abstract
Surge arresters play an important role in maintaining the reliability and protection of the high voltage power systems. Various diagnostic online monitoring methods of surge arrester are based on the decomposition of the measured leakage current into their capacitive and resistive components. The arrester's resistive component of the leakage current, in particular, the third harmonic component, is known as to be directly related to the degree of degradation of the ZnO blocks. This paper proposes an online monitoring technique for the surge arrester under dry and pollution conditions when measuring either the total leakage current or both the internal and external leakage currents of three different types of surge arresters. This technique based on feature extraction of the magnitudes, frequencies, and phase angles of all frequency components of the real measured current signals using Prony analysis-Hilbert transform approach and MATLAB program. The observed results illustrate the viability of this technique for online monitoring of surge arrester. Furthermore, the effect of voltage harmonics on the measured leakage currents is investigated through surge arrester model simulation performed with PSCAD program.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: IEEE Transactions on Dielectrics and Electrical Insulation
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.