Abstract
The condition monitoring problem of power devices is significant for diagnostics and prognostics of a switched-mode power supply (SMPS) system. For power mosfet , the gate oxide degradation often occurs in various applications. However, there is no online condition monitoring method for gate oxide degradation so far. In this paper, a new precursor that can be used for online condition monitoring of power mosfet gate oxide degradation is proposed. Gate oxide degradation mechanisms and effect are summarized, and the mosfet turn-on process is analyzed. Then, a theoretical model is established to describe the relationship between miller platform voltage and two types of gate oxide defects, and miller platform voltage is identified as a new precursor. The precursor can be extracted without impacting system operation, thus online condition monitoring can be accomplished. The accelerated degradation test is carried out for power mosfet s with both high electric field and gamma irradiation methods, and the degraded devices injection and in situ monitoring of miller platform voltage are conducted on a BOOST circuit to verify the feasibility of the new precursor. Experimental results demonstrate that the new precursor can be applied to online condition monitoring of power mosfet gate oxide degradation in the SMPS system.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.